1、web3和web4都要操作准备RS的web服务，web3/web4安装httpdyum install httpd -y
2、web3和web4都要操作[root@web3 ~]# service start httpdstart: unrecognized service[root@web3 ~]# service httpd startStarting httpd: httpd: apr_sockaddr_info_get() failed for web3httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [ OK ][root@web3 ~]# chkconfig httpd on[root@web3 ~]# chkconfig --list|grep httpdhttpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off[root@web3 ~]#
3、访问测试[root@web4 ~]# curl 192.168.122.53welcome to web3You have new mail in /var/spool/mail/root[root@web4 ~]# curl 192.168.122.54welcome to web4[root@web4 ~]#
4、web3和web4都要操作，开启arp抑制[root@web3 ~]# cat arp.sh#!/bin/bashcase $1 instart) echo 1 >/proc/sys/net/ipv4/conf/all/arp_ignore echo 1 >/proc/sys/net/ipv4/conf/lo/arp_ignore echo 2 >/proc/sys/net/ipv4/conf/all/arp_announce echo 2 >/proc/sys/net/ipv4/conf/lo/arp_announce ;;stop) echo 0 >/proc/sys/net/ipv4/conf/all/arp_ignore echo 0 >/proc/sys/net/ipv4/conf/lo/arp_ignore echo 0 >/proc/sys/net/ipv4/conf/all/arp_announce echo 0 >/proc/sys/net/ipv4/conf/lo/arp_announce ;;esac[root@web3 ~]#[root@web3 ~]# chmod +x arp.sh[root@web3 ~]# ./arp.sh
5、RS配置VIP接口，web3/web4 同时配置[root@web3 卯掏跨几~]# ifconfig lo:0 192.168.122.200 netmask 255.255.255.255 broadcast 192.168.122.200 upYou have new mail in /var/spool/mail/root[root@web3 ~]# route add -host 192.168.122.200 dev lo:0[root@web3 ~]# route -nKernel IP routing tableDestination Gateway Genmask Flags Metric Ref Use Iface192.168.122.200 0.0.0.0 255.255.255.255 UH 0 0 0 lo192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth00.0.0.0 192.168.122.1 0.0.0.0 UG 0 0 0 eth0
6、准备director的ipvsadmweb1/web2上操作yum install ipvsadm -y
7、web1/web2上操作[root@web1 ~]# ipvsadm -C[root@web1 ~]# ipvsadm -A -t 192.168.122.200:80 -s rr[root@web1 ~]# ipvsadm -a -t 192.168.122.200:80 -r 192.168.122.53 -g -w 1[root@web1 ~]# ipvsadm -a -t 192.168.122.200:80 -r 192.168.122.54 -g -w 2[root@web1 ~]# ipvsadm -L -nIP Virtual Server version 1.2.1 (size=4096)Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConnTCP 192.168.122.200:80 rr -> 192.168.122.53:80 Route 1 0 0 -> 192.168.122.54:80 Route 2 0 0 [root@web1 ~]#
