1、网桥配置：ip，网关，掩码以及网卡名字，根据实际情况进行调整，文档为示例单网卡的宿主机，对应创建一个网桥即可添加网桥brctl addbr br0brctl addbr br1
2、外网网桥搭建：淦甓特猩物理网卡的配置ifcfg-eth0BOOTPROTO=noneDEVICE=eth0NM_CONTRO讣嘬铮篌LLED=noONBOOT=yesBRIDGE=br0网桥的配置ifcfg-br0DEVICE=br0ONBOOT=yesTYPE=BridgeNM_CONTROLLED=noBOOTPROTO=staticIPADDR=xx.xx.xx.xx NETMASK=xx.xx.xx.xx GATEWAY=xx.xx.xx.xx DEFROUTE=yesDNS1=114.114.114.
3、内网网桥搭建:物理网卡的配置ifcfg-eth1BOOTPROTO=noneDEVICE=eth1NM_CONTROLLED=noONBO晦倘佳鳎OT=yesBRIDGE=br1网桥的配置ifcfg-br1DEVICE=br1ONBOOT=yesTYPE=BridgeNM_CONTROLLED=noBOOTPROTO=staticIPADDR=xx.xx.xx.xx NETMASK=xx.xx.xx.xxDEFROUTE=yes重启网络service network restart重启系统reboot
4、受控端安装:受控端一键安装方式：(XXXX-XXXX-XXXX-XXXX为序列号)Number=XXXX-XXXX-XXXX-XXXX Install_Path=/usr/local bash -c "$(curl -L -k https://upload.zkeys.com/soft/controller/kvm/zkvm_install.sh )"
6、镜像目录结构:例如：config.ini 配置文件设置的镜像存放目录为/home/kvm/template即在此目录下创建相应的文件夹，然后存放镜像文件镜像文件名和文件夹名称需保持一致
