1、创建 vlan<SW1> system-view //进入系统模式[SW1] vlan batch 2 to 5 //批量新建 vlan 2 到 5
3、配置 IP 地址做为 PC 电脑的网关[SW1] interface Vlanif 2 //旅邯佤践进入三层 vlanif2 接口[SW1-Vlanif2] ip address 192.168.2.1 255.255.255.0 //配置 ip 地址[SW1-Vlanif2] quit //退出 vlanif2 接口[SW1] interface Vlanif 3[SW1-Vlanif3] ip address 192.168.3.1 255.255.255.0[SW1-Vlanif3] quit[SW1] interface Vlanif 4[SW1-Vlanif4] ip address 192.168.4.1 255.255.255.0[SW1-Vlanif4] quit
6、SW2---PC，接口需要配置成 access 模式[SW2] interface GigabitEthernet0/0/23 //对接 PC1[SW2-GigabitEthernet0/0/23] port link-type access //链路类型为 access[SW2-GigabitEthernet0/0/23] port default vlan 2[SW2-GigabitEthernet0/0/23] quit[SW2] interface GigabitEthernet0/0/24 //对接 PC2[SW2-GigabitEthernet0/0/24] port link-type access[SW2-GigabitEthernet0/0/24] port default vlan 3[SW2-GigabitEthernet0/0/24] quit<SW2> save
